Properties of Aniline (C6H7N)

Aniline is a basic aromatic amine with the chemical formula C6H7N. It is a colorless to pale yellow liquid with a distinctive, somewhat unpleasant odor. Aniline is an important precursor in the production of various chemicals and materials, including dyes, pharmaceuticals, and rubber.

The following table provides a comprehensive list of aniline properties in both SI and US customary/Imperial units at normal temperature and pressure (NTP).

Click on the icon to switch between Metric and Imperial units.

Table of Aniline Properties
Physical Properties
Metric
Molar Mass93.13 g/mol
Density1025 kg/m3
Dynamic Viscosity4.35 mPa·s
Surface Tension42.66 mN/m
Thermal PropertiesMetric
Melting Point-6 °C
Boiling Point184 °C
Thermal Conductivity0.172 W/m·K
Specific Heat Capacity (Cp)2084 J/kg·K
Coefficient of Thermal Expansion (αV)8.5×10-4 1/°C
Vapor Pressure0.08 kPa
Critical ConstantsMetric
Critical Temperature (Tc)426 °C
Critical Pressure (Pc)5.31 MPa
Critical Molar Volume (Vc)270 cm3/mol
Electrical PropertiesMetric
Relative Permittivity (εr)7.06
Optical PropertiesMetric
Refractive Index (589 nm)1.586
Hazardous DataMetric
Flash Point70 °C
Autoignition Temperature615 °C
Lower Flammability Limit1.3%
Upper Flammability Limit11%
NFPA Rating (Health)3
NFPA Rating (Fire)2
NFPA Rating (Reactivity)0

Unless stated otherwise, all values are taken at room temperature (approximately 20°C or 68°F) and 1 atm pressure. (1 atm = 101,325 Pa)

References: 1) Cardarelli, François. Materials Handbook: A Concise Desktop Reference. Switzerland: Springer International Publishing, 2018. 2) CRC Handbook of Chemistry and Physics, 97th Edition. United Kingdom: CRC Press, 2016-2017. 3) Yaws, Carl L. The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals. Netherlands: Elsevier Science, 2015. 4) Fire Protection Guide to Hazardous Materials, 14th Edition. United States: National Fire Protection Association, 2010.