Magnesium AM100A-F (UNS M10100)
AM100A-F is a magnesium alloy commonly used in sand and permanent mold casting. It is a lightweight alloy with good weldability, tensile strength, and elongation.
Chemical Composition | ||
---|---|---|
Element | Min | Max |
Magnesium | Remainder | |
Aluminum | 9.3% | 10.7% |
Copper | 0.10% | |
Manganese | 0.10% | |
Nickel | 0.01% | |
Silicon | 0.30% | |
Zinc | 0.30% |
The following table provides a list of magnesium AM100A-F properties in both SI and US customary/Imperial units.
Click on the icon to switch between Metric and Imperial units.
Physical Properties | Metric |
---|---|
Density | 1830 kg/m3 |
Mechanical Properties | Metric |
Tensile Strength (Ultimate) | 150 MPa |
Tensile Strength (Yield) | 83 MPa |
Fatigue Strength # of Cycles 1.0e+8 | 48 MPa |
Shear Strength | 125 MPa |
Young’s Modulus (E) | 45 GPa |
Shear Modulus (G) | 17 GPa |
Elongation at Break in 50 mm | 2% |
Poisson’s Ratio (ν) | 0.35 |
Brinell Hardness 500 kg load, 10 mm ball | 53 |
Rockwell Hardness | 61 |
Vickers Hardness Converted from Brinell | 68 |
Machinability | 100% |
Charpy Impact V-notch | 0.800 J |
Thermal Properties | Metric |
Melting Point Incipient Melting | ≥ 430 °C |
Solidus | 463 °C |
Liquidus | 595 °C |
Thermal Conductivity | 73 W/m·K |
Specific Heat Capacity (Cp) | 1050 J/kg·K |
Coefficient of Thermal Expansion (αL) | 25.0 1/°C |
Heat of Fusion | 372 J/g |
Electrical Properties | Metric |
Electrical Resistivity | 1.50×10-5 Ω·cm |
The values in this table are approximate and can vary depending on various factors such as the specific manufacturing process and heat treatment applied to the alloy.
Advantages & Disadvantages of Magnesium AM100A-F
Advantages | Disadvantages |
---|---|
Light weight | Corrosion prone |
Good strength | High cost |
Good weldability | Low melting point |
Applications of Magnesium AM100A-F
Magnesium AM100A-F is a good choice for applications where strength, lightness, and weldability are important. Some common applications of AM100A-F include:
- Aircraft parts: Magnesium AM100A-F is used in a variety of aircraft parts, including engine mounts, landing gear, and structural components.
- Automotive components: Magnesium AM100A-F is used in a variety of automotive components, including engine blocks, transmission housings, and suspension components.
- Machinery: Magnesium AM100A-F is used in a variety of machinery components, including gears, bearings, and housings.
- Tools: Magnesium AM100A-F is used in a variety of tools, including wrenches, hammers, and saws.
- Sporting goods: Magnesium AM100A-F is used in a variety of sporting goods, including golf clubs, bicycles, and skis.
- Medical devices: Magnesium AM100A-F is used in a variety of medical devices, including implants, surgical instruments, and diagnostic equipment.