Yield and Ultimate Tensile Strength of Aluminum Alloys
The tensile strength of aluminum alloys can vary depending on the specific alloy composition, heat treatment, and other factors. The following tables provide a list of yield and ultimate tensile strength values for common aluminum alloys.
Click on the icon to switch between SI (MPa) and US customary/Imperial (psi) units.
| 1050-O | 30 | 70 |
| 1050-H14 | 100 | 110 |
| 1050-H16 | 125 | 130 |
| 1050-H18 | 145 | 160 |
| 1060-O | 28 | 69 |
| 1060-H12 | 76 | 83 |
| 1060-H14 | 90 | 97 |
| 1060-H16 | 105 | 110 |
| 1060-H18 | 125 | 130 |
| 1100-O | 34 | 90 |
| 1100-H12 | 105 | 110 |
| 1100-H14 | 115 | 125 |
| 1100-H16 | 135 | 145 |
| 1100-H18 | 150 | 165 |
| 1350-O | 28 | 83 |
| 1350-H12 | 83 | 97 |
| 1350-H14 | 97 | 110 |
| 1350-H16 | 110 | 125 |
| 1350-H19 | 165 | 185 |
| 2011-T3 | 295 | 380 |
| 2011-T8 | 310 | 405 |
| 2014-O | 95 | 185 |
| 2014-T4 | 290 | 425 |
| 2014-T6 | 415 | 485 |
| 2017-O | 70 | 180 |
| 2017-T4 | 275 | 420 |
| 2024-O | 76 | 185 |
| 2024-T3 | 345 | 485 |
| 2024-T4 | 325 | 470 |
| 2024-T6 | 415 | 495 |
| 2036-T4 | 195 | 340 |
| 2048 | 415 | 455 |
| 2219-O | 75 | 170 |
| 2219-T42 | 185 | 360 |
| 2219-T62 | 290 | 415 |
| 2618 | 370 | 440 |
| 3003-O | 40 | 110 |
| 3003-H12 | 125 | 130 |
| 3003-H14 | 145 | 150 |
| 3003-H16 | 170 | 180 |
| 3003-H18 | 185 | 200 |
| 3004-O | 70 | 180 |
| 3004-H32 | 170 | 215 |
| 3004-H34 | 200 | 240 |
| 3004-H36 | 230 | 260 |
| 3004-H38 | 250 | 285 |
| 3105-O | 55 | 115 |
| 3105-H12 | 130 | 150 |
| 3105-H14 | 150 | 170 |
| 3105-H16 | 170 | 195 |
| 3105-H18 | 195 | 215 |
| 4032-T6 | 315 | 380 |
| 4043-O | 70 | 145 |
| 4043-H18 | 270 | 285 |
| 5005-O | 41 | 125 |
| 5005-H12 | 130 | 140 |
| 5005-H14 | 150 | 160 |
| 5005-H16 | 170 | 180 |
| 5005-H18 | 195 | 200 |
| 5050-O | 55 | 145 |
| 5050-H32 | 145 | 170 |
| 5050-H34 | 165 | 195 |
| 5050-H36 | 180 | 205 |
| 5050-H38 | 200 | 220 |
| 5052-O | 90 | 195 |
| 5052-H32 | 195 | 230 |
| 5052-H34 | 215 | 260 |
| 5052-H36 | 240 | 275 |
| 5052-H38 | 255 | 290 |
| 5056-O | 150 | 290 |
| 5056-H18 | 405 | 435 |
| 5056-H38 | 345 | 415 |
| 5083-O | 145 | 290 |
| 5086-O | 115 | 260 |
| 5154-O | 115 | 240 |
| 5154-H32 | 205 | 270 |
| 5154-H34 | 230 | 290 |
| 5154-H36 | 250 | 310 |
| 5154-H38 | 270 | 330 |
| 5182-O | 130 | 275 |
| 5182-H32 | 235 | 315 |
| 5254-O | 115 | 240 |
| 5254-H32 | 205 | 270 |
| 5254-H34 | 230 | 290 |
| 5254-H36 | 250 | 310 |
| 5254-H38 | 270 | 330 |
| 5454-O | 115 | 250 |
| 5454-H32 | 205 | 275 |
| 5454-H34 | 240 | 305 |
| 5456-O | 160 | 310 |
| 6005-T1 | 105 | 170 |
| 6005-T5 | 240 | 260 |
| 6010-T4 | 170 | 290 |
| 6061-O | 55 | 125 |
| 6061-T4 | 145 | 240 |
| 6061-T6 | 275 | 310 |
| 6063-O | 48 | 90 |
| 6063-T1 | 90 | 150 |
| 6063-T4 | 90 | 170 |
| 6063-T5 | 145 | 185 |
| 6063-T6 | 215 | 240 |
| 6066-O | 83 | 150 |
| 6066-T4 | 205 | 360 |
| 6066-T6 | 360 | 395 |
| 6070-O | 70 | 145 |
| 6070-T4 | 170 | 315 |
| 6070-T6 | 350 | 380 |
| 6205-T1 | 140 | 260 |
| 6205-T5 | 290 | 310 |
| 6351-T4 | 150 | 250 |
| 6351-T6 | 285 | 310 |
| 7005-O | 80 | 195 |
| 7075-O | 105 | 230 |
| 7075-T6 | 500 | 570 |
| 100.1 | 30 | 80 |
| 201.0-T4 | 215 | 365 |
| 201.0-T6 | 435 | 485 |
| 201.0-T7 | 415 | 460 |
| 204.0 | 200 | 225 |
| 206.0-T7 | 345 | 435 |
| 295.0-T4 | 110 | 220 |
| 295.0-T6 | 165 | 250 |
| 296.0-T4 | 130 | 255 |
| 296.0-T6 | 180 | 275 |
| 296.0-T7 | 140 | 270 |
| 308.0-F | 110 | 195 |
| 359.0-T61 | 255 | 330 |
| 359.0-T62 | 290 | 345 |
| 360.0-F | 170 | 325 |
| 380.0-F | 165 | 330 |
| 383.0-F | 150 | 310 |
| 384.0-F | 165 | 330 |
| 390.0-F | 240 | 280 |
| 390.0-T5 | 260 | 300 |
| 413.0-F | 140 | 300 |
| 443.0-F | 60 | 150 |
| 514.0-F | 85 | 170 |
| 518.0-F | 190 | 310 |
| 520.0-T4 | 180 | 330 |
| 535.0-F | 140 | 275 |
| 712.0-F | 170 | 240 |
| 850.0-T5 | 75 | 160 |
The yield and ultimate tensile strength values in this table are approximate and can vary depending on the specific composition and processing of each alloy.
Related Tables
References: 1) Cardarelli, François. Materials Handbook: A Concise Desktop Reference. Switzerland: Springer International Publishing, 2018. 2) CRC Materials Science and Engineering Handbook. United States: CRC Press, 2000.